1.1 Soft lithography
Microstructure나 nanostructure을 만들기 위한 printing, molding의 과정을 포함하는 technique으로, 일반적으로 printing, molding, transfer의 3단계 과정을 거친다.
1.1.1 Printing
Master를 만드는 과정이다. Photolithography, e-beam, micro-machining, photoresist 등 다양한 방법을 통해 원하는 모양을 가지는 master를 제작할
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
laminar flow hood를 사용한다.
◀ 음압 진공펌프를 이용한 여과멸균 장치
(2) 저온살균법(pasteurization)
우유의 저온살균법은 오염된 우유를 통해 질병을 전염시키는 Brucella sp, Coxiella burnetii, mycobacterium tuberculosis, Salmonella, Listeria 등과 같은 세균들을 살균하기 위한 멸균방법이다. 이러한 미생물들을 상대
Laminar Flow
Laminar flow is a fluid regime characterized by high momentum diffusion and low momentum convection.
Transition
Laminar → Turbulent
Turbulent Flow
Turbulence or turbulent flow is a fluid regime characterized by low momentum diffusion, high momentum convection, and rapid variation of pressure and velocity in space and time.
1. Turn on the water supply
Flame Ionization Detector) : 불꽃이온화 검출기
원리 : 수소와 공기의 불꽃에서 시료가 연소될 때 전하를 띈 이온이 생성되며 이때 이온의 전류를 측정한다. 대부분의 유기화합물들은 이 불꽃의 온도에서 열분해되어 이온성 중간체를 형성한다. 기체의 전기전도도가 기체 중의 전하를 띈 입자의 농도에 직
층류인지 난류인지 전이영역인지를 파악해보고 각 영역에서 Reynolds수를 계산하여 흐름형태(층류, 난류, 전이영역)의 상관관계를 알아본다.
2> 기본 이론
1. 층류 : 관 내를 흐르는 층류 유동의 속도 분포층류(laminar flow)란 유체가 평행한 층을 이루어 흐르며, 이 층 사이가 붕괴되지 않음을 의미한다.
Investigate the relationship
between flow condition and
fluid velocity in order to
understand Reynolds
number in flow dynamics
A. Shear Stress
B. Viscous & Inertia Force
C. Reynolds Number
D. Laminar & Turbulent Flow
E. Type of flow
Shear stress slow down the motion so that the velocity close to the wall will reduce
→ velocity gradient (dy/dx)
A dimensionless number is a quantity which describes a
Certain physical system and which is a pure number without
Any physical units
The fluid undergoes irregular fluctuations, or mixing, in
Contrast to laminar flow, in which the fluid moves in smooth
Paths or layers
In turbulent flow the flow the speed of the fluid at a point is continuously undergoing changes in both magnitude and di
Laminectomy
한 개, 또는 그 이상의 척추궁을 절제해 주는 수술인데, 척추의 압박 골절, 탈구, 추간판 탈출증, 척수 종양 등을 치료하기 위해 척주나 그 연결구조에 도달하기 위한 전단계로 시행된다. 수술 절차는 laminar 사이를 노출시켜 이탈된 수핵을 조금씩 제거해 주는 것이다
Laminectomy
Laminectomy